Penn State 3D Printing Team Advances to Phase 3, Level 4 of NASA Competition

03/26/2019

By Megan Lantz

UNIVERSITY PARK, Pa. – Penn State’s 3D printing team, PennStateDen@Mars, has advanced to Phase 3, Level 4 of the NASA 3D-Printed Habitat Competition, after clutching a third-place victory in Phase 3, Level 3 of the competition.

The purpose of NASA’s 3D-Printed Habitat Competition is to curate new methods of developing a sustainable habitat in a variety of environments, specifically by using recycled materials and/or materials local to the specified environment. Essentially, the competition is seeking to find possible methods of constructing livable conditions by using 3D printing technology. When assessing the structures, judges will be considering the Martian environment.

Phase 3, Level 3 required teams to create a 3D-printed shelter for the seal test stage of the challenge. The shelters were analyzed for their ability to hold a seal, for strength and for durability in extreme temperatures.

To secure their third-place victory and $83,755.92 in earnings, PennStateDen@Mars executed a hydrostatic leak test. This test consisted of filling the 3D printed structure with water to a particular level and then measuring the amount of time taken for water to escape the tank.

Aleksandra Radlińska, assistant professor of civil engineering, added that the structures for future colonization of Mars need to be tight to ensure no radiation could possibly enter the shelter and that there would be no leakage of oxygen.

The entry for Phase 3, Level 3 of the competition was prepared in the 3D printing lab on the University Park campus in December.

The successful completion of the seal test challenge allowed the team to move on to the final level: constructing a 3D printed habitat that will be sustainable on Mars. This part of the competition will take place April 29 - May 4, 2019 in Peoria, Illinois. The winner of this level of the competition will receive a $500,000 prize to aid future research and development.

When discussing Phase 3, Level 4 of the competition, Radlińska said, “The requirements are very ambitious for this challenge because this one is head to head, toe to toe, in a large, open space when the printing has to happen in front of judges. There’s only one opportunity to do it right.”

According to Radlińska, the competition not only pushes the team in the realm of 3D printing, but it also strengthens their skills in team work and timely delivery of the built product.

NASA has a desire to explore deeper space and to send missions to the moon and Mars, said Radlińska, but this can’t be done unless there’s a place to shelter both humans and equipment. Due to the cosmic radiation and solar and cosmic parts, NASA needs to perform tests such as these to ensure anyone traveling to Mars or the moon for prolonged periods of time will be safe.

PennStateDen@Mars is led by Shadi Nazarian, associate professor of architecture, and José Duarte, the Stuckeman Chair in Design Innovation and director of the Stuckeman Center for Design Computing. Other faculty members involved include: Sven Bilén, department head of SEDTAPP and professor of engineering design, electrical engineering and aerospace engineering; Ali Memari, professor of architectural and civil engineering and Bernard and Henrietta Hankin Chair in Residential Building Construction; Nicholas Meisel, assistant professor school of engineering design, technology and professional programs; and Randall Bock assistant research professor of agricultural and biological engineering.
 

Share this story:

facebook linked in twitter email

MEDIA CONTACT:

Megan Lantz

mel5512@psu.edu 

“The requirements are very ambitious for this challenge because this one is head to head, toe to toe, in a large, open space when the printing has to happen in front of judges. There’s only one opportunity to do it right.”

 
 

About

The School of Engineering Design and Innovation delivers effective engineering education and unrivaled research opportunities through active, collaborative, project-based, and professionally oriented classroom experiences. The school offers a variety of programs that partner faculty, students, and industry in the study of real-life engineering problems. Our programs teach students to solve real-life problems with innovative solutions. 

School of Engineering Design and Innovation

304 Engineering Design and Innovation Building

The Pennsylvania State University

University Park, PA 16802

Phone: 814-865-2952